| TECHNICAL SPECIFICATIONS |
| CAPACITY |
6" to 10" bore holes to a depth of 363 mtr ( 1200ft ) |
| PRIME MOVER |
Truck mounted rig with power from truck engine through transfer gear box |
| WORK METHOD |
Rotation with direct circulation, nucleus destruction with bleeding by water, air |
| |
or foam. Drilling by drag bit (over burdern) Roto percussion with DTH hammer |
| MAST |
Box type structure |
| |
Max Capacity - 18 tons (39600 lbs)
|
| |
Height
- 8.00 mtr ( 27 ft )
|
| |
Rod handling capacity – 6.1 mtr ( 20 ft ) |
| HYDRAULIC OIL COOLER |
90 GPM fin type cooler fan drive through hydraulic motor |
| PULL UP AND PULL DOWN |
By means of hydraulic cylinder and wire rope, Reeving Ratio 1:3 |
| |
Max Pull up force - 9200 kgs ( 20,240 Ibs ) |
| |
Max pull up speed - 48 mtr/min (158 ft/min)
|
| |
Max pull down force - 6318 kgs ( 13900 lbs )
|
| |
Max pull down speed - 56 mtr/min (184 ft/min) |
| HYDRAULIC SYSTEM |
210 kg / cm2 ( 3000 psi ) |
| ROTARY HEAD |
Rotary head is powered by one hydraulic motor |
| |
Max torque - 26,400 in - lbs (303kg - mtrs)
|
| |
Max speed - 0 to 200 rpm |
| JACKS |
Four hydraulic jacks of Box type of 90 x 56 x 795 |
| WATER INJECTION PUMP |
Triplex reciprocating pump of 50 lpm 1000 psi powered by hydraulic motor |
| BREAK OUT WRENCH |
To open the drill joints hydraulic break out wrench of 350 mm stroke |
| |
will be provided |
| ROD CHANGER |
Manually operated rod changer to handle 3 rods with 1000 kgs capacity pull up
|
| |
winch to carry drill rods, casings and hammer tools |
| OPTIONAL ATTACHMENTS |
Welding machine, mud pump, diesel filling pump, skid platform with deck engine |
| SUITABLE COMPRESSOR |
900 cfm, 200 psi / 1100 cfm, 300 psi |
