 |
One of our most popular drills within the Indian market... for drilling small diameter blast holes in tough formation, nothing beats the RBH-6-100. It is a self-propelled crawler mounted machine which means rapid deployment from location to location. The RBH-6-100 is designed for speed. Its rotary drive system is capable of operating at upto 135 RPM. |
|
|
RATED CAPACITY: |
|
5.1/2" [140mm] to 6.1/2" [165mm] dia. Holes using 4.1/2" [114mm] /5" [127mm] OD drill rods upto 30 Mtrs. |
|
|
PULL DOWN: |
|
Through hydraulic cylinder and wire rope / chain system variable upto 16363 Kgs. [36000 lbs] |
|
|
ROTARY DRIVE SYSTEM: |
|
Hydraulic top drive head. Multiple motor and sturdy gear box. Speed infinitely variable 0-135 RPM. Torque variable upto 44000in lbs [508 Kg.mt.] |
|
|
AIR COMPRESSOR: |
|
21.2 mt3/min. at 7 Kg./cm2 [750 CFM 100 PSIG]/ Rotary screw type compressor. |
|
|
POWER SYSTEM: |
|
Single diesel engine developing around - 300 HP at 1900 RPM for driving air compressor and hydraulic system through power-take-off arrangement. (Electric Version also available) |
|
|
MOUNTING: |
|
Crawler track mounted with 10 bottom rollers and 2 carrier rollers. 24" wide triple grouser pads. Three point suspension hydraulic- track chain adjuster. Travel speed 1.5 kmph, grade ability 30% and ground bearing pressures less than 0.75 Kg/cm2 |
|
|
LEVELLING JACKS: |
|
3 Nos. hydraulic jacks with safety check valves individually controlled. |
|
|
MAST: |
|
Electrically welded structural steel of suitable length for drill rod supplied with drill. Single pass 6 Mt. |
|
|
DRILL ROD: |
|
5" [127mm] OD x 20 ft. [6.09 M] Long drill rod with 3 1/2" API Reg box and pin connections as standard. |
|
|
ROD CHANGER: |
|
'Rose' pivoted rod changer to carry 3 Nos. of drill rods, hydraulically indexable carousel. |
|
|
BREAKOUT WRENCH: |
|
Breakout wrench hydraulically operated. |
|
|
HYDRAULIC SYSTEM: |
|
Rotary vane pumps driven from power-take-off. Three individual circuits in conjunction with standard interchangeable low speed, high torque motors of Roller Vane type oil reservoir capacity 500 Liters. |
|
|
DUST COLLECTOR: |
|
The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series). |
|
|
CONTROLS: |
|
Control console provides fingertip control of all functions. |
|
|
|
OPTIONALS : |
|
Rig suitable for 8 Mtrs single pass. |
Rig suitable for 10 Meters single pass. |
Choice of Compressors. |
Twin diesel engine one for air compressor and other for hydraulic system. |
Rod changer suitable for 5 Nos. drill rods |
Night lighting arrangement. |
Auxiliary winch. |
Air line Lubricator. |
Water injection system. |
Single Electric Motor. |
PC based data logger. |
|
Dimensions |
|
In meters |
A |
12.15 |
B |
3 |
C |
4.9 |
D |
11.16 |
E |
3.10 |
F |
1.15 |
G |
3.80 |
H |
- |
|
|
|
|
|
|