Diamond Drilling, Drilling Equipment, Drilling Rig, Dth Drilling Rig, Drilling Rigs, Well Drilling Rig

JUPITER Air Crawler Drill capable of drilling 102 -114mm (4-4 1/2") dia hole to a depth of 36.5 mtr used in open Cast Mines for Drilling and Blasting Purposes.

JUPITER Air Crawler Drill is a self propelled crawler type drill, designed for drilling holes in vertical and horizontal planes. The drill Guide,boom,controls are all mounted on a heavy duty track assembly.

JUPITER Air Motors:

4-Cylinder & 5-Cylinder Radial Piston type Air motors are suitably designed with well balanced and nil vibrations provide smooth operation of Rotatary Head, Feed unit, Propelling unit and driving Hydraulic Pump for operation of five Hydraulic Cylinders.

Control Panel:

Centralized sensitive controls pneumatic and Hydraulic with auto-feed arrangement is so arranged to ensure ease of operation which reduces operator fatigue

Track & Traction Drive:

Rugged Durable Overlapping steel track pads are made to withstand punishments and keep right on going. Mechanical track oscillation are provided allowing the track to flex up on either side providing positive ground contact while tramming over rough terrain.

Tramming power is supplied by two Powerful 9.0 H.P Radial Piston type Air Motor coupled to Self-braking Spur-Worm combination reduction gearbox and chain drive on either side. This is enough to tram the CD-110 with its compressor in tow right to the job site.

Jupiter Rock Drills Down the Hole Air Hammer

SPECIFICATION

Mode of Drilling	Down the Hole Air Hammer	Pneumatic Drifter
Capacity:	102 to 114mm dia	32mm dia
Depth:	36.0 mtr	8mtr

Rotation Unit
4 Cylinder Piston type Air Motor directly coupled to spur type Gearbox

B.H.P. at 1250 RPM and at 7 Kg. cm2	4.0-4.5
Gear Ratio	1 :24.4
Rotation speed RPM	0-50
Max Torque	1125Nm(10,OOOinlbs).

Winch/Feed Unit
4 Cylinder Piston type Air Motor directly coupied to spur cum worm drive Gearbox

B.H.P. at 1250 RPM and at 7 Kg. cm2	4.0-4.5
Gear Ratio	1:29.7
Pull Down Force	0-2200 kgf
Pull Up Force	0-2200 kgf
Max Pull Up Speed	0-15 m/min

Air Motor for Hydraulic Driver
Piston type Air Motor directly coupled to Hydraulic Pump 4 Cylinde

B.H.P. at 1250 RPM and at 7 Kg.cm2	4.0-4.5
Hydraulic Pump	7.6 litre/min , 2GPM
Pressure	140 kg/cm 2

Self Propulsion Unit (For individual Track)
5 Cylinder-Piston Type Air Motor directly coupled to spur cum worm drive Gearbox

B.H.P. at 1250 RPM and at 7 Kg.cm2	9.0-9.5
Gear Ratio	1:59.5
Traveling Speed	2.5Km/hr

DIMENSIONS & WEIGHT
Overall length	4770mm
Overall Width	1785mm
Height	1650mm
Ground clearance	250 mm
Track Width	260 mm
Track length (Ground contact)	1400 mm
Track Oscillation	Provided
Total Weight	31 00 Kg
HORIZONTAL DRILLING RANGE
Minimum Height from Ground	860 mm
Maximum Height from Ground	2600 mm
Maximum Width	1400 mm

POSITIONING
Boom Lift above Centre Line	45° up, 30° down
Boom Swing	45° right ,45° left
Drill Guide Tilt	75° (two position)
Drill Guide Swing(Horizontal)	45° right ,45° left
Drill Guide Dump	750mm
TRAMMING
Propulsion Air Motor	9 H.P. each
Tramming speed	2.5 km/hr
Climbing ability	25°
Draw bar pull	1400 Kg

COMPRESSOR:: Minimum capacity requirement 10.3 m3/min - 7kg/cm2 (365cfm-100psi)
Upto 12.7m3/min -10.5 kg/cm2 (450cfm-150psi) acceptable
Product improvement is a continuing goal of JUPITER. Design and Specifications are subject to change without notice or obligations

CRAWLER DRILLS